TCI MAXI JOLLY US DALI 60 W | 127413 | 151413

TCI DC Maxi Jolly US DALI 60W - Flickerfree Constant Current Dimming via DALI

Two successors of the famous LED ballast from TCI: DC Maxi Jolly US DALI 50W. (#123413)
Noteworthly innovations:

• Power: 60W instead of 50W
• Novel dimming to avoid flicker
  • Type 127413
    • Hybrid: Combination of linear (AM) and known PWM
    • Conditionally suitable for cameras according to the following dimming ranges
    • Linear dimming (flickerfree) in the range of 100% - 25%
    • Switching to PWM (2KHz) in the range 25% - 1%
    • As a result, very precise dimming even in the lower dimming range
    • Optionally switch to PWM only at 240Hz by setting a bridge possible. (Details in the data sheet)
    • Master/slave operation possible via sync lines
  • Type 151413
    • Pure amplitude dimming (linear dimming)
    • Camera-friendly without restriction (no flicker, even at high shutter speeds, as no PWM)
    • Dim2warm available
• Tc-value of 90°C

Note:  Value for constant current, or voltage can be set via dip switch.
By the possibility to configure currents from 350mA to 1050mA, As well as a power of up to 60W, this LED constant current converter is versatile. In addition, it offers dimming options for 1-10V or also via touch operation.

Overview of the technical data of the LED ballast 60W from TCI

• Multi-Current Converter - Universally applicable.
• Ext. Temperature sensor optional (connection for NTC available)
• Dimming option via 1-10V control voltage. (Or alternatively via a 100K ohms potentiometer)
• Push button or button operation: On / off by means of short push button, change of the brightness of the held button.

As a US version with remarkable improvements:

• Improved EMC
• Improved Overvoltage proctection (Surge) of 3.5-4kV
• UL certified

Dipswitch settings

Efficiency of the LED driver depending on the power: 30W - 60W: 87% - 92%

All TCI Jolly LED ballasts with PWM are dimmable via sync cable. Thus, the control is possible via only one push-button.
Up to 10 LED converters (slave) can be operated via a master.
Switches and installation materials are not included in the scope of delivery.

For detailed description please refer to the data sheet.

History of this proven TCI LED Converter for dimming via DALI, 1-10V or Push

TCI 122412 --> Setting range 350mA - 1.4A and fixed voltage 48V
TCI 122413 --> Setting range 350mA - 1.05A and fixed voltage 48V, US version with higher surge voltage
TCI 123413 --> Like 122413, but also compliance with the ecodesign directive with standby power <0.5W