LED Spots GU10 230V

LED Spots GU10 (230V) in Lamp Shape MR16

These are alongside the familiar light bulb the biggest "electricity guzzlers".
The level of efficiency (luminous efficacy rating) is not noticeably better than
of the ligh bulb. It is just the MR16 design which is still in use as halogen
lamps and could be exchanged without compromising immediately against
LED spots. The energy saving is about 85%.

GU10 is the 230V socket variant of the MR16 design. This GU10 spot with 50mm diameter has a base with two thick pins that are "screwed" by pressing and turning into the socket.

This high-voltage LED spotlight 230V includes an integrated LED driver and works more efficiently than the "little brother" with GU5.3 socket, since no additional transformer must be connected in front.

For more Information regarding GU10 LED spots lamps please scroll down.

LED Spots GU10 (230V) in Lamp Shape MR16 These are alongside the familiar light bulb the biggest "electricity guzzlers". The level of efficiency (luminous efficacy rating) is... read more »

Close window

LED Spots GU10 (230V) in Lamp Shape MR16

GU10 is the 230V socket variant of the MR16 design. This GU10 spot with 50mm diameter has a base with two thick pins that are "screwed" by pressing and turning into the socket.

For more Information regarding GU10 LED spots lamps please scroll down.

Filter for quick search

No results were found for the filter!

A G

LED Spot 4W GU10 Switchable LEDON

1..10V
GU10 (HV)
2700K
Spot MR16
1 - 5 W

38.62€ *

Order number: L-29100007

Delivery time 3-5 workdays*

see Details

A G

LEDON GU10 LED Spot 6W (Set of 5)

Phase-Cut (Triac)
GU10 (HV)
2700K
Spot MR16

Content 5 Stück (9.39€ * / 1 Stück)

Variants from 46.95€ *

Order number: 394-29100010-5

Delivery time 3-5 workdays*

see Details

Downlight PASSUM UP GU10

GU10 (HV)
floor installation

Variants from 342.13€ *

Order number: 4529-MG-5-R

Delivery time 3-5 workdays*

see Details

A G

LED Downlight MR16 10W

Phase-Cut (Triac)
GU10 (HV)
2700K
Spot MR16

35.34€ *

Order number: 471-29001278

Delivery time 3-5 workdays*

see Details

A G

LED Downlight MR16 10W Sunset Dimming

Phase-Cut (Triac)
GU10 (HV)
2700K, Dim2Warm/Sunset
Spot MR16

41.25€ *

Order number: 470-29001281

Delivery time 3-5 workdays*

see Details

LEDON-downlight mounting frames

GU10 (HV)
Spot MR16

Variants from 5.51€ *

Order number: 197-28000524

Delivery time 3-5 workdays*

see Details

In compare GU10 spot to halogen as well as incandescent light

Lamp type	Luminous efficiency	Lifetime
Light bulb	10 lm/W	ca. 1000 h
Halogen lamp	15 - 25 lm/W	ca. 2000 h
LED spot 230V	60 - 100 lm/W	ca. 25000 h

This table above clearly shows that an exchange of halogen to LED makes perfect sense. Even at low
burn durations, payback occurs within one year of implementation.For use in hotels having high burning times the costs are usually saved after 2-3 months.

LED spots MR16 and the topic with dimming

While halogen bulbs could be dimmed easily, it is only possible with LED spots and other LED lamps,
which are explicit marked accordingly as "dimmable". With low voltage care must be taken to ensure if the
transformer is also dimmable. If you ignore it, so there may be flickering at LED spots and both of them
could be destroyed.

The socket types GU10

While MR16 describes the design with a diameter of 50mm, these differ even in the connector base
and thereby also in the operating voltage. For direct connection to 230V, the base type GU10 is used (see. GU5.3) Sockeltyp GU10 This socket follows the bayonet principle. The e. g. LED spot MR16 type GU10 is pressed into the socket and turned afterwards. An exchange is usually not a problem. GU10 is recognizable by 10mm contact distance.

Most application of the LED spot GU10:

Hotels, restaurants, offices and meeting rooms. Actually everywhere where previously MR16 halogen lamps
are used. There is no more reason to wait for.