LED-Dimmer 12-48V up to 576 W with push button, DALI

LED-Dimmer 144W to 576W - for constant voltage, with push button & DALI control

For LEDs that operate at constant voltage, this is the ideal dimmer. It has a large number of control options, such as an external button, control voltage or DALI control. The different operating modes of the LED dimmer are to be set by dip-switches and jumpers. 

Further features:

• LED dimmer is controllable by:
  • DALI² LED dimmer for constant voltage
  • Push button (for SELV, or 230 Vac, galvanically seperated from SELV; with permanent memory)
  • Control voltage 0-10V and 1-10V
  • Slave mode
• Operation modes (to be set with dip switches and jumpers before power-on):
  • Slave Set 1: To be set with 800980 and 800981 as Master
  • ON/OFF: Press one: on/off
  • PUSH: as ON/OFF; press and hold: brighter and darker, at max/min level: dimming is reserved. Min..Max: 10 seconds
  • PUSH FAST: as PUSH; but Min..Max: 5 second
  • PUSH UP/DOWN: as PUSH FAST; but stop at max. or min.
  • DALI²: Controlled by DALI, at absence of DALI signal: dim level 100%. Do not use with ABB DALI controllers!
  • 0-10 V: Minimum at 0,5 V
  • 1-10 V: Minimum at 1 V (Potentiometer 100 K? or electronic (potential free): J1, or potential carrying controller: J2)
  • Slave Set 2: To be set with 800638 and 800632 as Master
• Slave synchronised via PWM control cable (recommended: shielded; max. 50 slaves)

Technical data:

For further information please refer to the data sheet in the Download tab.

History (precursor):

800581