DALI relay contact RM relay module 24034702

DALI relay contact RM module 24034702 for controlling via the DALI bus

Product characteristics:

• Compact relay module for controlling a standard contactor or load via DALI
• Easy integration of loads without DALI input into a DALI circuit; the loads can be switched on and off via DALI commands
• Switch-on and switch-off points can be configured using the parameters MIN LEVEL, MAX LEVEL, FADE RATE and FADE TIME
.
• The DALI-Cockpit is a free DALI configuration tool from Lunatone available for configuration download
• The DALI RM is supplied via the DALI bus
• Loads may only be connected directly to the DALI RM if the inrush current of the load is below 6A. Otherwise a contactor must be connected in between. Alternatively, we recommend using the DALI RM8 (up to 80A inrush current) or DALI RM16 (up to 160A inrush current) modules for high inrush currents.
• The maximum load of a contactor coil may be connected to the DALI RM.
• When selecting the correct contactor, the inrush current of the contactor must also be observed; this must not exceed 6A
.
• DC contactor coils must be equipped with freewheeling diodes

Technical Data:

• Supply: from DALI bus
• typical current consumption on DALI bus: 10 mA
• Inputs: DALI
• DALI address: 1
• Output switching voltage: 250VAC/35VDC
• Switching current output: 4A
• max. Inrush current of the load: 6A
• Contact type: 1 changeover
• Mechanical life of switching cycles: 1x10⁷
• Electrical life, switching cycles (4A/250VAC, resistive): 6x10⁴
• Temperature: 0 °C - 50 °C
• Protection class: IP20
• Cross section of connecting wires: 0.75 mm²
• Length of connecting wires: 250 mm