COB LED Strips 15W/m 12V/24V 5m

Flexible chip on board LED tape with SMD LEDs, 5m length, beam angle 180 °, 8W / m, 12 / 24V, CRI> 90, various colour temperatures

Through the implementation of the "Chip-On-Board" technology and the resulting beam angle of 180 °, this COB LED Strips are ideal for a wide variety of indoor applications in which it provides very good illumination. The high color rendering index (CRI> 90) plays a large part in this. In addition, the bar can be used flexibly, especially since it can be separated between the individual units and has a corresponding bending radius.
The COB LED strips are available in versions with 12V and 24V constant voltage. There are also versions with different colour temperatures in a range from 2200 K to 6500 K.

The innovative COB LED strips technology

With the newly developed "Chip-On-Board" technology, a homogeneous beam quality can be achieved with LED strips, since the individual LED points are no longer visible. With a continuous light band, delicate, narrow lines of light can be created. This is not least due to an extremely densely populated LED strip (here: 528 LEDs / m). The use of COB LED strips as effect light or path and orientation lighting is particularly impressive.

Product overview / features:

• 5 m flexible COB LED Strip with SMD-LED
• With 15 cm connection cable
• Self-adhesive (additional fixture is recommended
• Divisible between units, with solder pads
• Recommendation: Control the Ts-temperature at the solder point of an LED
• Bending radius in places with components min. 50 mm; attach without pressure
• Extensive illumination thanks to a large beam angle of 180 °
• Densely mounted LED strip: 528 LEDs / m

Installation note:
It is advisable to attach the COB LED strips to a heat-conducting surface in order to achieve optimal cooling. When mounting on an electrically conductive material, care must be taken to insulate the connections.

Technical data: