BL-204-10-868 EVG FLEX, EnOcean-DALI-Controller

BL-204-10-868 EVG FLEX EnOcean-DALI-Controller

The type BL-204-10-868 EVG FLEX offers a DALI master and an integrated DALI power supply for the direct connection of up to 15 slaves (Iout max. = 30 mA), without the need for a separate DALI power supply.

In addition, an EnOcean radio transceiver is integrated. These features allow the easy and hassle-free combination of DALI ballasts or DALI LED drivers and light switches with wireless EnOcean technology. The device is supplied with 230 V AC mains voltage.

The DALI bus of the BL-204-10-868 EVG FLEX can be accessed either additionally or alternatively via the AL-500-00 DALI 4-channel input module (Art. no. 12 002) up to 4x 4 = 16 wired switches or switches. buttons are read in and used locally for the control. In addition, this switching information is sent via EnOcean as RPS radio telegrams to control external actuators or to link other lighting controls.

It is free configurable with our PC software BL-PC-FLEX-2, and provides the following Features:

• 230 V AC power supply voltage
• 1x DALI Master
• Integrated DALI power supply for up to 15 DALI Slaves (Iout max. = 30 mA)
• 1x EnOcean Master, bi-directional (TCM310)
• Internal antenna
• PC Configuration tool BL-PC-FLEX-2 to configure DALI and EnOcean functionality (not included)
• To be mounted directly into luminaires and profiles
• Dimensions: 144 x 21 x 18 mm
• New: Supports AL-500-00 DALI input module 4-channel, for wired light switches / push buttons / motion detectors etc.

Remove further data from our download tab

Application example AL-500-00 BL-204-10-868 EVG FLEX

The following video shows the use of an AL-500-00 DALI 4-channel input module on a BL-204-10-868 EVG FLEX.

The AL500-00 is connected to the DALI bus and is supplied by it. The first input A is connected with a conventional light switch.

On the left side of the picture you can see the software BL-PC-FLEX-2. This has been started and the EnOcean USB stick is connected (COM field highlighted in green).

If the button is now pressed, it first appears on the right in the EnOcean Explorer as "available". With a double click this is "projected".

The key press corresponds to “A1.”

The ON/OFF/DIM function is configured as DALI BROADCAST for the A1 key and the configuration is loaded into the EnOcean DALI controller BL-204-10-868 EVG FLEX.

At the end you can see the desired functionality when you press the button.