Aviora Panel

Aviora Panel with reflector microfacetted optics

Modern design with revolutionary optics
The special structure of the reflector microfacettes (Bartenbach development) of the Aviora generates a beam angle of 85° FWHM (corresponds to 100° FWTM), without generation of disturbing stray light.

Normally the beam angle of a luminaire is half the highest lux value of the light beam (Full Width at Half Maximum, FWHM). This is usually accompanied by a lot of stray light outside the beam, which causes disturbing glare. For this reason, Illuxtron panels also work with beam sizes that are based on the height of the 10% lux value (half the half-width or "Full Width at Tenth Maximum", FWTM).

In other words, the LED panel directs the light exactly where you want it, onto the work surface and only slightly onto the walls with a pleasant transition.

This makes it possible to meet the 500 lux requirement on the work surface of a 5 x 5 metre room with only 4 x 20 watts.  

Features and advantages of the Illuxtron Aviora Panels

 

Aviora 595x595 / 620x620

All Aviora LED Panels are available with either 2700-6500K, 3000K or 4000K, as well as different housing Colours, lumen packages or powers, as well as ballasts included in the set (dimmable via DALI, 1-10V&Push or switchable only)

Overview of available Aviora panels with article numbers.

For further information on the Aviora Panels, please refer to the data sheet in the download tab.

Note:
The products of the manufacturer Illuxtron are manufactured individually according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the load.