1Ch 0-10V LED PWM Dimmer / Booster

1Ch 0-10V LED PWM Dimmer / Booster Control Gear

ED driver (CV) with one channel, can be operated as PWM Booster or Dimmer.
The device operates as PWM-Booster, if PWM-signals are applied to the input (50Hz-1kHz)
If operated with 100kO potentiometer or 0-10V control devices (active and passive), the device functions as Dimmer.

Overview:

• 1 channel LED dimmer
• Suitable for constant voltage LED-modules
• Control signals: PWM (50Hz-1kHz), 100kOhm potentiometer, 0-10V voltage signal (active and passiv)
• Logarithmic dimming curve
• Analog input: connection of a 100kOhm potentiometer or a 0-10V control device (active or passive), the 0-10V input signal is transformed in a corresponding PWM output signal
• PWM control signal: suitable for operation with a LED-dimmer with common plus connector
• Supply voltage of 12V to 48V DC
• Maximum current: 16A
• Suitable for remote ceiling

 
RECOMMENDATION: Care should be taken on keeping cable lengths between DC power supply and dimmer as well as between dimmer and luminaires (Led-Strings) as short as possible. This kind of installation will minimize the influence of voltage drops.

For further information please refer to the data sheet in the Download tab.